ASM Introduces Compact MEMS Inclinometer for OEM Applications

ASM introduces its smallest addition to the POSITILT® inclinometer series that is available in single and dual axis versions. By using MEMS technology, this new inclinometer PTAM20 series is packaged into a very compact, flat housing making it ideally suited for OEM applications. The measurement range for the single axis version is available from +/- 15° to +/- 180°, in increments of 15°. For the dual axis version, the measurement range is available from +/- 15° to +/- 60°, in increments of 15°.

Due to its small size of 7mm in height and 48 mm in diameter, the PTAM20 series inclinometer has been designed to fit into the tightest locations in OEM applications. The enclosure is rated IP60 which is suitable for many instrumentation functions.

The maximum measurement range for the single axis version is +/- 180° and +/- 60° for each axis in the dual axis version. Each version is available with smaller ranges in +/- 15° increments. Several analogue output types are available: 0.5-4.5 V, 0.5-10 V and 4-20 mA.

The resolution is 0.05° and the linearity is up to +/- 0.5°. Each version offers high shock resistance.

ASM UK
www.asm-sensor.co.uk

Customize Your Sensor

Settling for an off the shelf sensor may not be the way to go for application that has special requirements. As a result, Sherborne Sensors recent expansion of custom manufacturing capabilities for its accelerometer, inclinometer and load cell product lines, as well as its ability to design and develop a custom sensor could be advantageous. This is especially true if the application requires special mechanical consideration such as a custom form factor, temperature rating or weatherproofing. However, custom electrical requirements such as a non-standard range, electronic output filters, special electrical connection, special power requirements or custom calibrations are also possible from Sherborne. The company focuses on industrial, military and aerospace applications.

For more information check out Sherborne Sensors website: http://www.sherbornesensors.com/

DC-Operated High Precision Servo Inclinometers

Sherborne Sensors has announced the North American launch of Series T435, a single axis, high-precision, closed loop gravity referenced servo inclinometer family, designed for down-hole logging applications, or for use in areas where space is at a premium.

With a form factor measuring only 1.6 in. (40.6mm) high and less than 1.46 in. (37mm) in diameter, sensors can be stacked for simultaneous X & Y measurement of tilt angles. Models are available in ranges from ±3° to ±90°. Series T435 offer a high-level DC output signal, proportional to the sine of the available angle of tilt. Units are fully self-contained, and able to connect to a DC power source and readout or control device for a complete operating system. The T435 series are also extremely rugged, and can withstand a 1500g shock event. Solder pin terminations are standard.

Sherborne Sensors
www.sherbornesensors.com