Superior Sensor Technology announced an extension to its ND Series with two new pressure sensor families for mid-pressure range applications. These new devices will enable manufacturers to cost-effectively develop more accurate and stable products for numerous industrial equipment applications operating at low to mid pressure ranges. The new families include the ND Series absolute mid-pressure […]
Torque sensor houses sensing head and electronics separately
Sensor Technology has extended its new range of torque sensors with a model that has the sensing head and electronics in separate housings. This has two advantages: the sensing head can fit into very confined spaces, and the electronics can be located in a position where they are protected from physical damage, dust, dirt, moisture, […]
Ultrasonic ToF sensors work at short and long ranges
TDK Corporation has introduced the Chirp ICU-10201 and ICU-20201, two new high-performance, ultra-low power integrated ultrasonic Time-of-Flight (ToF) sensors for short- and long-range detection. The new MEMS sensors embed a more powerful on-chip processor with higher computational power; the enhanced processing capabilities allow a wide range of application algorithms to fit and to run on-chip, […]
MEMS microphones feature SoundWire compatibility
TDK Corporation has introduced the T5828 SoundWire MEMS microphone as part of the SmartSound family of performance products for mobile, TWS, IoT and other consumer devices. This family of high-performance microphones pushes the boundaries of microphone acoustic performance, providing advanced feature sets in small package footprints. The T5828 SoundWire MEMS microphone offers a high acoustic […]
Six-axis MEMS motion sensors features supreme vibration rejection, temperature stability
TDK Corporation announced the availability of the InvenSense ICM-45xxx SmartMotion ultra-high-performance (UHP) family of 6-axis MEMS motion sensors. This family introduces the on-chip self-calibration, industry’s lowest power consumption, and world’s first BalancedGyro™ (BG) technology. BalancedGyro technology by TDK is the first-of-its-kind gyroscope MEMS architecture that enables supreme vibration rejection and temperature stability performance, an enhancement […]
24-position optical encoder features integrated pushbutton
C&K has launched a new optical rotary encoder, the ENC Series 24-Position Optical Encoder with an integrated pushbutton. The new ENC Series encoder was developed as an improvement to our very successful 16 Position Optical Encoder. In addition to adding 50% more detent positions, the 24-position encoder also includes an oft-requested right angle connector socket […]
Special architecture lets CMOS image sensors double saturation signal level, widen dynamic range, reduce noise
Sony Semiconductor Solutions Corporation (“Sony”) has succeeded in developing the world’s first*1 stacked CMOS image sensor technology with 2-Layer Transistor Pixel. Whereas conventional CMOS image sensors’ photodiodes and pixel transistors occupy the same substrate, Sony’s new technology separates photodiodes and pixel transistors on different substrate layers. This new architecture approximately doubles*2 saturation signal level*3 relative to conventional […]
HMI touch sense devices now ultra low-power
Infineon Technologies AG launched the company’s fifth-generation CAPSENSE capacitive and inductive touch sensing human-machine interface (HMI) technology. The next-generation CAPSENSE solution embedded in PSoC microcontrollers delivers higher performance and lower power consumption for demanding user interfaces in-home appliances, industrial, consumer, and IoT products. The enhanced HMI enables advanced solutions like proximity sensing with the improved […]
Three-axis gyroscope/accelerometer combo is automotive qualified
TDK Corporation announces the availability of InvenSense IAM-20680HT high temperature automotive monolithic 6-Axis MotionTracking sensor platform solution for non-safety automotive applications, which includes the IAM-20680HT IMU MEMS sensor and the DK-20680HT developer kit. The IAM-20680HT embeds a 3-axis gyroscope and a 3-axis accelerometer in a thin 3 x 3 x 0.75mm (16-pin LGA) package and […]
MEMS DC accelerometer chips optimized for low-g work
Silicon Designs, Inc. announced the global market launch of its Model 1525 Low-G Series of MEMS DC accelerometer chips, with stock quantities now available for immediate customer shipment. The Silicon Designs Model 1525 Low-G Series is designed to offer reliable, accurate, and repeatable low-frequency (including seismic) vibration and acceleration measurements within a variety of inertial- […]
