Novotechnik, U.S. announces the RFX 6900 Series of touchless rotary sensors. These magnetic sensors are designed for use in mobile, safety-related, and extreme environment applications. Now with custom ranges available. The housing of the RFX 6900 Series is anodized aluminum and sealed to IP 67 or IP 69K, depending on the version. The series conforms […]
Novotechnik U.S.
Compact touchless angle sensors measure up to 50 mm
Novotechnik introduces the TFD Series of touchless linear position sensors that provide wear-free operation in tight spaces. Maximum sensor dimensions are 40 x 27 x 7 mm thin. The sensing direction can be either parallel or perpendicular to mounting holes. The TFD-4000 Series utilizes a magnetic position marker to provide a touchless measurement range of […]
Touchless angle sensorssport IO-Link output interface
Novotechnik U.S. introduces the RFC4800 Series of touchless angle sensors measuring angular position up to 360°, revolution counter, and speed—without wear. The RFC 4800 is now available with an IO-Link output interface. Its serial communication protocol needs only three wires to transmit measured values and status information simultaneously. The status bit can signal a controller […]
Rod position sensors carry stainless steel shields
Novotechnik, U.S. introduces the LWX-002 Series shaft protected position sensors designed for extremely harsh environments. The all-metal sensor shaft is protected over its range of motion with an SS304 alloy, 0.9 mm thick stainless steel shield. The LWX-002 Series has a differential pressure compensation system with a Gore membrane to compensate for the pump effect […]
Novotechnik launches new compact angle sensors
Novotechnik, U.S. introduces the Vert-X 1600 Series of sensors that measure angular position and are compact housing base diameter of 16 mm. Vert-X 1600 Series sensors These sensors convert rotational angle into an analog or digital output. Measurement range is 0 to 360° with 14-bit resolution and repeatability of 0.1°. Available analog outputs are 10 […]
Novotechnik introduces customizable angle sensors
Novotechnik, U.S. introduces the Vert-X 2800 Series of sensors that measure angular position. These sensors convert rotational angle into an analog or digital output. Digital interface options include J1939 CANBus as well as SPI and PWM. The J1939 CAN bus option enables peer-to-peer or broadcast signaling and is a standard often found in commercial vehicle […]
Angular Position Sensors with Analog or Digital Output
Depending on the version, Novotechnik, U.S. Vert-X 2800 Series of sensors measure angular position and convert rotational angle into an analog or digital output. Analog outputs options are 4 to 20 mA, 0.1 to 10 V, 10 to 90% of supply voltage and 5 to 95% of supply voltage. Digital output choices are SPI or […]
Touchless angle Sensors with IO-Link
Novotechnik, U.S. introduces the RFC4800 Series of touchless angle sensors measuring angular position up to 360°, revolution counter and speed—without wear. Features include programmable zero point offset, measurement averaging and sign of rotational direction. RFC4800 Series has a resolution of 14-bits across 360°, repeatability of 0.36° and independent linearity of ±0.5% of full scale. IO-Link […]
Sensing Shaft Position in Environments that Require Sealed Packaging
Food processing, as well as many industrial machinery applications, requires sensors with packages sealed to meet the international IP69K standard and avoid problems with liquids, dust and dirt. Novotechnik U.S. RFD4000 Series of 7 mm flat angle sensors target these specific uses. The sensor employs a Hall effect sensing technique with a microprocessor to detect […]
Novotechnik U.S. announces the EasyAdapt Programming Tool
Novotechnik U.S. announces the EasyAdapt Programming Tool for their Programmable Vert-X line of rotary angle sensors and encoders designated Vert-X MH-C2. The EasyAdapt Tool enables easy and fast programming of sensors and consists of programming software, a hardware programming device and cables to connect the device to a user’s PC and the sensor being programmed. […]
