At Sensors Expo 2015 in Long Beach, CA, David Grice, an application engineer from ZMDI shows how the company’s ZSSC3154 sensor signal conditioner can be configure to work as a mass airflow meter using constant temperature anemometry. For more information about the ZSSC3154, click here.
Using Magnetoresistive Sensing Technology
At Sensors Expo 2014, Josef Janisch, global product manager for Multimarket Sensing at ZMDI explains the capabilities of ZMDI’s newest magnetic position sensor (ZSSC5101) that uses magnetoresistive sensing technology. To watch the video, click here. For more information about ZMDI products, click here.
Pressure Sensors for Different Applications
At Sensors Expo 2014, David Ezekiel vice president of Sales and Marketing at Servoflo discusses ZMDI signal conditioning circuits used in medical and harsh pressure sensing applications with an example of a low pressure sensor that has the ZMDI circuitry integrated in the package. To watch the video, click here. For more information about Servoflo […]
Sensor Signal Conditioner Supports Sent 3.0 Output and ASIL B Requirements
Automotive applications for low-cost sensor networking can be addressed with the SAE J2716 SENT (Single Edge Nibble Transmission) protocol. The point-to-point network approach transmits signal values from a sensor to a microcontroller or digital signal processor. At the same time, many automotive safety applications are requiring automotive safety integrity level (ASIL) qualification. To address these […]
Increase Sensor Performance with 14-Bit Capacitive Sensor Conditioning IC
Designed for low-power operation, ZMDI’s ZSSC3123 complements the small size and lower power consumption capabilities of capacitive sensors. The chip delivers 14-bit resolution and 0.25 % accuracy over a wide range of sensor capacitances and temperatures. Operating power consumption is 60 µA with a sleep mode to lower to less than 1µA. The IC has […]
Sensor Signal Conditioner IC Addresses Resistive Bridge Circuits
If you have found the right pressure sensor for your application but it needs addition signal conditioning, the ZMDI ZSSC3008 may solve your problem. The first requirement is a pressure sensor with an intrinsically low temperature coefficient (TC). If that’s the case, the rest of the IC’s features come into play. These features include offset […]
Capacitive Signal Conditioner for MEMS Sensors in Harsh Industrial Environments
ZMDI’s ZSSC3122 is capacitive sensor signal conditioner with wide-dynamic-range and low power consumption. The chip delivers 14-bit resolution and 0.25% full-scale-output accuracy. The signal conditioning circuit has an operating current as low as 60 µA over the entire voltage range of 1.8V to 5.5V. A built-in sleep mode lowers current consumption to <1 µA for […]
Connect Sensors in Point-to-Point Systems Easily with ZMD Dev Tool
Depending on the system, different sensor interfaces are required. For example, in automotive applications, Controller Area Network (CAN) or Local Interconnect Network (LIN) are common networks for communicating sensor data. However, the SAE J2716 SENT (for Single Edge Nibble Transmission) protocol has been developed and companies have started to introduce products that meet it. In […]
Sensor Signal Conditioning
Randy Frank discusses differences in signal conditioning circuitry.
@SensorTips
EE World Online
YouTube
Instagram