PKP Process Instruments, A manufacturer and distributor of a wide range of process instrumentation introduced its model DR05 Flow Meter.
Model DR05 paddle-wheel flow sensors are used wherever the flow of liquids having low viscosities must be reliably and economically measured, including but by no means limited to, cooling systems, demineralized water and aggressive/caustic liquids in the chemical industry.
The DR05 paddle-wheel flow sensor measures the flow of water and substances similar to water. The flow sensor consists of a section of polypropylene pipe fitted with a paddlewheel. The paddle wheel, which extends into the area of flow, is set into rotation by the flowing liquid. The rotary motion is detected by a Hall sensor and output as a series of pulses. The output frequency of these pulses is directly proportional to the flow rate. Alternatively, the pulsed output can be converted into an analog signal (4 to 20 mA) or into two limit contacts by optional integrated electronics. DR05 paddle wheel flow sensors are made completely of plastic; they have no metal parts. Wetted materials include a PP housing, ECTFE rotor and ceramic axels and bearings. Viton seals are standard (EPDM optional).
These devices are available for pipe sizes of 1″ to 2″ with turndown ratios of up to 50:1.
