Endress+Hauser launches the Memosens CCS51D amperometric sensors for free chlorine measurement in process water, drinking water, water & wastewater treatment, cooling water, and all utilities and processes requiring clean, treated, water. Free chlorine is the most important disinfectant in water treatment due to its easy handling, the strong disinfecting effect, and the residual effect. A […]
Endress+Hauser releases Nivector FTI26 point level switch
Endress+Hauser announces the Nivector FTI26 point level switch for detection of all types of powdered and fine-grained solids such as plastic granules, detergent, grain, sugar, spices, milk powder, animal feed and other dry materials. The switch can be installed at the top of a tank to indicate high level, or at the bottom of a […]
Endress+Hauser introduces the Memosens CCS50D chlorine dioxide sensor
Endress+Hauser is developing a new platform for disinfection sensors. The new Memosens CCS50D chlorine dioxide sensor supports safe and effective disinfection for clean drinking water, pathogen-free cooling water, and high-quality process water Systematic disinfection is an essential step in water treatment and legally required in many areas to protect people and systems from illness or damage. […]
Digital sensor with analogue heart
The future-proof ceramic pressure sensor Ceracore USC30 from Endress+Hauser combines the advantages of the digital with the analogue world If you use analogue output signals in your pressure application and still want to take advantage of a digital signal in the future, you often only have the choice between purely digital or purely analogue sensors. […]
Pressure Sensors Target Tough Measurements
While it is the most popular approach for pressure sensors, microelectromechanical systems (MEMS) technology requires considerable packaging enhancements to address liquid and corrosive gas measurements. In contrast, ceramic pressure sensors can more readily make these types of measurements. In its Ceracore UCS2 pressure sensors, Endress+Hauser uses Al2O3 (99.9 %), a highly resistant ceramic material. This allows the […]
Four-wire, Two-parameter Transmitter Reduces Cost / Saves Space
Endress+Hauser’s Liquiline CM442 is a four-wire, two-parameter transmitter for analytical sensing applications. By accepting data from any two of the company’s Memosens sensors such as turbidity/suspended solids, nitrate, SAC (UV254), ISE, dissolved oxygen, pH/ORP, chlorine, concentration and conductivity, the transmitter avoids the cost of a second device and saves space with a simplified system. Powered […]
@SensorTips
EE World Online
YouTube
Instagram